EP-1000 expansion agent powder EP-1000EP-1000膨胀剂

EP-1000 expansion agent powder EP-1000

EP-1000膨胀剂

一、Product introduction 产品简介

EP-1000 expansion agent has excellent performance, good micro-expansion effect, uniform and dense pores, does not affect the strength of the system, low dosage, and high cost performance. It is a non-toxic, odorless, green and environmentally friendly additive product.

After adding this product to dry mortar, concrete and other systems, it can form uniform and dense tiny pores, so that the system produces micro-expansion in the plastic stage, and maintains the micro-expansion in the hardening stage. Achieve the functions of compensating for concrete shrinkage, compacting concrete, and improving concrete impermeability.

    EP-1000膨胀剂性能优异，具有微膨胀效果佳、气孔均匀致密、不影响体系强度、掺量低、性价比高等优点，是一种无毒、无臭、绿色环保的添加剂产品。在干粉砂浆、混凝土等体系中加入此产品后能形成均匀致密的微小气孔，使体系在塑性阶段产生微膨胀，硬化阶段保持微膨胀，达到补偿混凝土干缩、密实混凝土、提高混凝土抗渗性等作用。

二、Scope of application 适用范围

     This product is often added to various cement-based grouting, mortar and concrete systems together with other additives. It is especially suitable for high-grade products that require plasticity and early expansion, such as grouting agents (materials) and various grouting materials.

   本产品多与其他添加剂一起添加到各类水泥基压浆、砂浆和混凝土体系，特别适用对塑性和早期膨胀有要求的高等级产品，如压浆剂（料）、各类灌浆材料等。

三、Main performance  主要指标

Product application examples 产品应用示例

四、Precautions for use  注意事项

1. The recommended dosage of this product is 0.20-0.50% for grouting material system and 0.02-0.05% for grouting material system. It can meet the requirements of different systems by increasing the dosage, and carry out a trial mix test before use to find the best dosage.
本产品推荐掺量为压浆材料体系0.20-0.50%，灌浆材料体系0.02-0.05%，可通过提高掺量满足不同体系要求，使用前进行试配试验，以求最佳掺量。

2. When using this product, the measurement must be accurate, and each mixture must be stirred evenly.
使用本产品时，必须计量准确，各拌合物需搅拌均匀。

3. This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration.
本产品具有热塑性，在高温环境下存储应避免受压，否则易引起结块。

五、Packaging and storage 包装与贮存

1、This product is powder, packed in paper-plastic bags, 25kg/bag.
     本产品为粉剂，纸塑袋包装，25kg/包。
   
2.  This product should be sealed and stored in time after opening the bag and using it.
本产品开袋使用后需及时密封保存。

3.  This product should be sealed and stored in time after opening the bag and using it.
应置于阴凉干燥处储存，避免阳光直射、雨淋。
    
4.  The warranty period is 12 months, and the overdue products can be used only after they are tested and verified.
质保期12个月，超期产品经试验验证合格后方可继续使用。

六、Technical Support  技术支持

In the preparation of various mixtures of this product, the company provides free professional technical consulting services and provides users with formula system optimization services.
本产品在各类拌合物配制中，公司免费提供专业技术咨询服务、提供各用户配方体系优化服务。